Cleaning - ERT Asthma Monitor AM1+ Gebrauchsanweisung

Cleaning

It is recommended to clean the sensor of the AM at regular intervals.
Releaser
The sensor is intended for single patient use, only. If the
AM is passed on to another patient, the AM surfaces have
to be cleaned and disinfected with a disinfectant
page for informa tion on disposal of sensor.
We recommend combined cleansing and disinfecting agents with the basic sub-
*1
stance quaternary ammonium compound, for example "Cleanisept Wipes" by Dr.
Schumacher GmbH.
Version 08.00 • 14APR2014
Sensor
Sensor Cleaning:
Release and remove sensor, rinse it with
distilled water in which a mild cleansing
agent is soluted.
Get rid of the remaining water by shaking
the sensor. Air-dry and reinsert the sensor.
. See next
*1
Seite/Page 105/140