Guide Bar And Saw Chain Combinations; Saw Chain Filing And File Gauges; Ec-Declaration Of Conformity - Husqvarna 135 Bedienungsanweisung

Guide bar and saw chain combinations

The following cutting attachments are type approved for the models Husqvarna 135, 135e, 140, 140e and 140e
TrioBrake.
Length, inch Pitch, inch
14 3/8
16 3/8
Saw chain filing and file gauges

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 135, 135e, 140, 140e and 140e TrioBrake from 2011's serial numbers and onwards
(the year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the
requirements of the COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2/A1:2009, CISPR 12:2007, EN ISO 11681-1:2008
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates
for EC type examination in accordance with annex IX, have the numbers: 0404/11/2306 - 135, 135e, 0404/11/2337 - 140,
140e, 140e TrioBrake.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The certificates have the numbers: 01/161/092, 01/161/097.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna December 8, 2011
Bengt Frögelius, Development director chainsaw R&D (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
32 – English
TECHNICAL DATA
Guide bar
Gauge, mm Max. nose radius
1,3 9 T
1,3 9 T
Saw chain
Length, drive links
Type
(no.)
52
Husqvarna H36,
Husqvarna H37
56
1154580-38 Rev.1 2011-12-05