Parkside HG04678 Bedienungs- Und Sicherheitshinweise Seite 64

1. Press the
valve manually (or just press the
opened valve).
2. Press the SET button
tion.
The hour display on the "Run Time" section will flash
on screen.
3. Set the hour of the watering time and confirm with the
SET button
The minute display on the "Run Time" section will
flash on screen.
4. Set the minute of the watering time and confirm with the
SET button
Remark: If you want to quit setting up the manually watering
mode, you can press the
programming and go back to the normal operation mode.
Remark: If the valve has been opened manually and a pro-
grammed start of a watering period overlaps the manual opening
period, the programmed starting time is suppressed.
64 GB/IE
button for approx. 2 seconds to open the
6
if you want to set a specific dura-
4
.
4
.
4
(ON / OFF) button
button to close an
6
to exit the
7