Connecting the units
When connecting to separately sold power amp
Rear output or
subwoofer output
Front output
This product
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (6*)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6*
and 7* when Pin 5 is an antenna control type.
In other types of vehicles, never connect 6* and
7*.
When you connect the separately sold
multi-channel processor (DEQ-P6600) to this
unit, do not connect anything to the speaker
leads and system remote control (blue/white).
When you connect the multi-channel processor
to this unit, refer to multi-channel processor's
installation manual for the connection method.
Note:
· Change the initial setting of this unit
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.
8
To rear output or
subwoofer output
To front output
Connect with RCA cables (sold
separately)
Blue/white (7*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
Left
Front speaker
Rear speaker
or Subwoofer
Power amp
(sold separately)
System remote control
Right
Front speaker
Rear speaker
or Subwoofer
Perform these connections when
using the optional amplifier.
Power amp
(sold separately)