Selecting A Source - Pioneer AVD-W6210 Anleitung

Selecting a Source

When the Pioneer Navigation unit is combined, you can select the images of each source.
• Select the desired source.
Each press of the SOURCE/POWER button selects the desired source in the following
order:
[AV IN1] = [AV IN2] = [NAVI SOURCE] = Exit to [AV IN1]
Note:
• [NAVI SOURCE] indicates the Pioneer Navigation unit with DVD-Video playback connected to
the hide-away unit's 26-pin input. (The source does not switch to [NAVI SOURCE] when the
Pioneer Navigation unit without DVD-Video playback or nothing is connected to the 26-pin input.)
• [AV IN1] and [AV IN2] are audio and video from the AV equipment connected to the AV IN1 or
AV IN2 input terminal. (Refer to page 26.)
• Verify the correct connection with the AV equipment connected to AV IN1 or AV IN2.
• AV IN2 is selectable only if either [ON] or [BACK-UP CAM] has been chosen in [VIDEO SET-
TING] . (Refer to page 16.)
• Pressing the NAVI/AV button will switch between navigation images (Navigation Map) or the
images of each source.
• When showing navigation images (Navigation Map), only the built-in speaker audio can be
switched with the SOURCE/POWER button.
A V I N 1
10