Power Control Function - Pioneer AVD-W1100V Anleitung

Settings

Power Control Function

When connecting with a head unit which has Power Control function, such as the AVH-
P7800DVD, you can turn the AVD-W1100V ON or OFF through the head unit.
1. Display a setup menu.
Follow step 1 and step 2 in the "Input Setting (VCR1/VCR2)". (Refer to page 18.)
2. Select [POWER.C].
Press the WIDE/MENU button. The selected item turns to blue.
S E T U P M E N U
VCR1 VCR1 VCR1
VCR2 VCR2 VCR2
POWER . C
3. Select Power Control function.
VOL–: [NORMAL]
You can turn this unit ON/OFF by pressing the SOURCE/POWER button.
VOL+: [FRONT]
You CANNOT turn this unit ON/OFF by pressing the SOURCE/POWER button.
ON/OFF control is provided by a head unit with Power Control function connected
by the CD-CP300 26pin component cable. (sold separately.)
e.g., when connected with AVH-P7800DVD.
Pressing REAR ON button on AVH-P7800DVD turns this unit ON. Press and hold
the button on the AVH-P7800DVD to turn the unit OFF.
4. Complete the setting.
Press and hold the WIDE/MENU button for 2 seconds or longer to close the menu and
complete the setting.
Note:
• If you do nothing for about 30 seconds after displaying the setup menu, the menu screen will disap-
pear.
19
AUTO AUTO AUT
AUTO AUTO AUT
NORMAL