Herunterladen Inhalt Inhalt Diese Seite drucken

About The Rca Video And Audio Outputs; Selecting The Audio, Video, And External Output - Pioneer AVD-W6000 Anleitung

Color lcd display
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

About the RCA Video and Audio Outputs of this Unit
When you connect a separate piece of AV equipment such as a second display to the RCA
video and audio output jacks of the hide-away unit, you can select the source for output
with the SEL/POWER button,
• The video and audio source of the RCA outputs of this unit cannot be selected indepen-
dently.
• The V.SEL, SP.SEL and Volume control buttons will have no effect even if operated.
CAUTION
Never position the display connected to the RCA output jack of the hide-
away unit, driver can view the picture while the vehicle is moving.

Selecting the Audio, Video, and External Output

When three icons are displayed in a line, you can simultaneously change the sources of
each icon.
If Display and Built-in speaker are set for independent switching, switch them simultane-
ously. (Refer to pages 9 and 11.)
• Select the desired source.
Each press changes the source ...
Each press of the SEL/POWER button selects the desired source in the following order:
[VCR1] = [VCR2] = [RGB] = Exit to [VCR1]
Note:
• [RGB] indicates the equipment connected to the hide-away unit's RGB input. (The source does not
switch to [RGB] when nothing is connected to the RGB input.)
• [VCR1] and [VCR2] are audio and video from the AV equipment connected to the VCR1 or VCR2
input terminal. (Refer to page 25.)
• Verify the correct connection with the AV equipment connected to VCR1 or VCR2.
• VCR2 is selectable only if either [VIDEO] or [S-VIDEO] has been chosen in [INPUT SETTING] .
(Refer to page 17.)
VCR 1
VO L
1 2
10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis