Technical Data - Parkside PKGA 20-Li C2 Originalbetriebsanleitung

GB MT
Battery and charger are not
included.
Overview
1 Keyless chuck
2 Torque adjustment ring
3 Gear selection switch
4 Drill attachment PKGA1
5 Unlocking lever for appliance at-
tachment
6 Motor unit
7 Direction switch
8 Handle
9 Rechargeable battery
10 On/off switch
11 Bit holder
12 Screwdriver bits, 50 mm, 6 no.
13 Drill bits 6 no.
14 Charger
15 Storage case
16 Sabre saw attachment PKGA3
17 Footplate
18 Lever for unlocking sawblade
19 Metal sawblade
20 Wood sawblade
21 Sanding plate
22 Multi-sander attachment PKGA2
23 5 sanding sheets
24 Dust extraction adaptor
25 Reducer
26 Multifunction tool PKGA4
27 Lever for unlocking tool
28 Arbor
29 Tool holder
30 Delta sanding plate
31 3 sanding sheets
32 Scraper blade
33 Plunge sawblade
72

Technical Data

4-in-1 Cordless
combination tool .................PKGA 20-Li C2
Motor voltage ............................. 20 V
Idling speed (n ) ....................21000 min
0
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Motor unit with drill attachment ..... PKGA1
Idling speed (n ) ........ 0-400/0-1350 min
0
Torque ................................ max. 35 Nm
Spread drill chuck ................ max. 13 mm
Drill diameter
for wood .......................... max. 13 mm
for steel ............................. max. 8 mm
Weight ......................................1.23 kg
Sound pressure level
(L ) ................... 83.7 dB(A), K
pA
Sound power level
(L ) ................. 94.7 dB(A), K
WA
Vibration (a )
h
drilling in metal .. 1.322 m/s
idling ..............1.531 m/s
Motor unit with multisander
attachment .................................... PKGA2
Oscillation rate (n
0
Sanding sheet size
Weight ...........................................1 kg
Sound pressure level
(L ) ................... 88.6 dB(A), K
pA
Sound power level
(L ) ................. 99.6 dB(A), K
WA
Vibration (a ) ......4.572 m/s
h
Motor unit with sabre saw
attachment .................................... PKGA3
Stroke rate (n
) .....................0-3200 min
0
Stroke length
= 5 dB
pA
= 5 dB
WA
2 , K=1.5 m/s
2 ; K=1.5 m/s
) ..............0-9000 min
.......138 x 97 mm
= 3 dB
pA
= 3 dB
WA
, K=1.5 m/s
2
...................... 22 mm
-1
-1
2
2
-1
2
-1