Advanced Settings; Playback Mode Memory (Play Mem); Ready Mode (Rdy Mode); Automatic Playback (Auto Play) - Yamaha CD-S303 Benutzerhandbuch

Advanced settings

This section explains how to configure various advanced functions. You can configure
most of these settings from the front panel. (Some settings require remote control
operation.)
PURE DIRECT
1
Place the unit in Standby mode (page 11).
2
Press and hold PURE DIRECT,
simultaneously for three seconds or longer.
The following indicator appears on the information display of the front panel, and
the unit enters setting mode. You can set the Playback Mode Memory, Ready
Mode, Automatic Playback, and Auto Power Standby functions in this order.
CD TEXT AAC WAV FLAC RESUM RDY TRACK TOTAL REMAIN PROG RNDM REP FOLDER ALL
3
Press or
4
Press (Stop).
The setting is confirmed, and the next parameter is automatically selected. Repeat
steps 3 and 4. When all settings are complete, the following indicator appears on
the information display of the front panel, and the unit enters Standby mode.
CD TEXT AAC WAV FLAC RESUM RDY
Note
• If you press (Play) during this process, the setting at that point will be confirmed, and the
unit will enter Standby mode.
(Open/Close), and (Play),
CD TEXT AAC WAV FLAC RESUM RDY TRACK TOTAL REMAIN PROG RNDM REP FOLDER ALL
to turn the function on or off.
TRACK TOTAL REMAIN PROG RNDM REP FOLDER ALL

Playback Mode Memory (PLAY MEM)

With this function enabled, the unit retains the Repeat playback and Random-sequence
playback settings even after the power to the unit is turned off. When the Playback
Mode Memory function is turned on, the Advanced setting indicator (RESUM) on the
display lights up.
Default: Off
Note
• If you turn on the power to the unit after enabling the Playback Mode Memory function, the unit will
play the most recently-played track or file from the beginning.

Ready Mode (RDY MODE)

With this function enabled, the unit pauses each time the playback of a track has
completed. You can start playback of the next track when you choose. When the Ready
Mode function is enabled, the Advanced setting indicator (RDY) on the display lights
up.
Default: Off

Automatic Playback (AUTO PLAY)

With this function enabled, the unit automatically starts playback when power to the unit
is turned on or when you switch to Disc or USB mode.
Default: On

Auto Power Standby (AUTO STBY)

With this function enabled, the unit automatically enters Standby mode if you do not
interact with it for 20 minutes after the playback has stopped.
Default: On
19
En