Playing A Specified Part Repeatedly (A-B Repeat Playback); Enjoying High-Quality Sound Playback (Pure Direct); Switching Information On The Display; Changing The Display Brightness - Yamaha CD-S303 Benutzerhandbuch

Playing a specified part repeatedly
(A-B Repeat playback)
You can specify the start and end points of a track during audio CD
playback to play the specified part repeatedly.
A/B
1
Play an audio CD.
DISPLAY
2
DIMMER
Press A/B at the point you want to start Repeat
playback.
CD TEXT AAC WAV FLAC RESUM RDY
3
Press A/B again at the point you want to end Repeat
playback.
The unit starts Repeat playback.
CD TEXT AAC WAV FLAC RESUM RDY
Note
• Repeat playback does not work with data CDs or USB flash drives.
PURE
• You cannot specify a part to repeat across tracks.
DIRECT
• You cannot specify the A-B Repeat setting when the PURE DIRECT
function is turned on.
• Do one of the following to cancel A-B Repeat playback:
– Press A/B again.
– Press (Stop).
– Open the disc tray.
Enjoying high-quality sound playback
(PURE DIRECT)
If the PURE DIRECT function is turned on, digital audio will not be
output. In this way, the PURE DIRECT function reduces noise that
would affect sound quality, enabling you to enjoy playback of high-
quality sound.
Pressing PURE DIRECT repeatedly will toggle between PURE
DIRECT on and off.
TRACK TOTAL REMAIN PROG RNDM REP FOLDER ALL
TRACK TOTAL REMAIN PROG RNDM REP FOLDER ALL
Note
• To use the PURE DIRECT function, connect the ANALOG OUT jacks on
the rear panel to the amplifier. The DIGITAL OUT jacks will not output any
signals.
• When the PURE DIRECT function is turned on:
– The PURE DIRECT indicator lights up.
– The front panel display will be turned off while content is playing.
– Only a minimum number of indicators and messages will appear while
you are operating the unit.
– This setting will be maintained after you turn off the power to the unit.

Switching information on the display

Pressing DISPLAY repeatedly during playback will switch the
information on the display as follows:
Playback media Information on the display
Elapsed time  Remaining time of the current
track (TRACK REMAIN)  Total remaining time on
the CD (TOTAL REMAIN)  Track name* 
Audio CD
Artist name*  Album title*
* If CD-text has been embedded
Elapsed time  Track name*  Artist name* 
Data CD,
Album title*
USB flash drive
* If tags have been embedded
Note
• The information display indicates up to 64 characters (1-byte alphanumeric
characters and several symbols).

Changing the display brightness

Press DIMMER repeatedly to switch between four stages of display
brightness.
15
En