Cleaning - Conrad 857907 Bedienungsanleitung

Ask a second person to simulate the „obstacle" behind your car.
The obstacle person very slowly walks towards the rear of the car from a distance of approx. 2 metres.
The shortest distance between the two vehicle sides and the obstacle is displayed on the screen at the
top in metres. The bar display signals the direction and distance between the 4 sensors and an obstacle.
The more bars are displayed, the closer is the obstacle.
Obstacle left Obstacle centre Obstacle right
This distance to an obstacle is also displayed acoustically with increasing intensity of the signal tone
(large distance = slow beep; small distance = fast beep).
The following warning areas must be observed.
Safe area between 2.0 - 1.6 m (no sound, distance display).
Safe area between 1.5 - 0.9 m (slow warning sound, distance display).
Warning area between 0.8 - 0.5 m (faster warning sound, distance display).
Danger area between 0.4 m - 0 m (fast warning sound, monitor display „STOP" <0.4 m).
In certain situations, the ultrasound measuring principle is not working reliably. This is possible where
ultrasound waves are absorbed, e.g. at slight slopes, rounded and soft obstacles and in rain.

Cleaning

Clean the outer sensors regularly to prevent malfunction. Use a soft, clean and slightly moistened cloth
for it.
Also clean the camera lens with a soft, clean, slightly moistened cloth.
Best clean the rear-view mirror with monitor with a soft, clean, slightly moistened and lint-free cloth with-
out any scouring and chemical cleaning agents. Never push the display. It may be damaged.
2