Asus WL-160W Schnellstartanleitung Seite 4

One Touch Wizard
Use One Touch Wizard to setup your wireless connection with an existing
wireless LAN.
1. Launch One Touch Wizard from Start
menu and click Next to set up your
wireless network.
3. Connection is complete. Click Next
to setup the IP address for the WLAN
Adapter.
Note: If the access point you want to connect has set up encryption
policies, you must configure the same encryption on your WLAN Adapter.
Select "Configure your wireless LAN settings" radio button in step 2
and make the settings accordingly. When the encryption settings are
complete, you can launch the One Touch Wizard once again from the Start
menu to set up the connection with your AP.
We suggest WL-160W work with WL-500W Super Speed N wireless router
for maximum performance. Make sure the router firmware is the updated.
Check ASUS website for router latest updated firmware.
2. Select an AP from the Available Networks
then click Next.
4. Choose to obtain an IP address or to
assign static address manually for your
W L A N A d a p t e r. W h e n I P s e t t i n g i s
complete, click Finish to exit the One
Touch Wizard.
ASUS WLAN Adapter
Quick Start Guide
3