Werbung
Using the bundled Y-Cable
Models: SDRW-08D2S-U / SDRW-08D2S-U LITE / SDRW-08D6S-U / SDRW-08U5S-U / SDRW-08U7M-U /
1. Connect the USB connector
2. Connect the Y-cable to your optical drive.
3. (For Windows only) Press the Eject button to open the optical drive tray.
4
Q17582_ODD_QSG_BOOK.indb 4
Q17582_ODD_QSG_BOOK.indb 4
SDRW-08U9M-U / SBC-06D2X-U / SBW-06D2X-U / SBW-06D5H-U / SDR-08B1-U
(optional) Connect the USB connector
USB port does not provide enough power through the USB connector
not functioning properly.
NOTE:
•
USB connector
is only used for additional power, and cannot be used for data transfer
•
If you are using a Blu-ray optical disc drive, please ensure to connect both USB connectors (
and
) to USB ports on your computer.
•
You may need to use a USB extension cable (purchased separately) to connect the additional
USB connector
if you do not have enough free USB ports on one side of the computer.
NOTE: This connector and port may vary between models.
on the Y-cable to a USB port on your computer.
to another USB port for additional power if your computer's
, resulting in the optical drive
2021/1/28 下午 02:53:35
2021/1/28 下午 02:53:35
Werbung
