Herunterladen Inhalt Inhalt Diese Seite drucken

Error Message Display - Pioneer CDJ-400 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für CDJ-400:
Inhaltsverzeichnis

Werbung

OTHER (TROUBLESHOOTING)

Error message display

When the CDJ-400 CD player is unable to operate properly, an error code is displayed on the display panel. Check the error code
displayed against the following table and take the recommended action to correct the error. If an error code other than any of the
error codes listed in the table below is displayed or if the same error code is displayed even after corrective action has been taken,
contact your nearest Pioneer Service Station or contact the store from which you purchased your player for assistance.
Error Code
Error Type
E-72 01
TOC READ ERROR
E-83 01
PLAYER ERROR
E-83 02
E-83 03
E-83 04
MP3 DECODE ERROR
E-83 05
DATA FORMAT ERROR
E-91 01
MECHANICAL TIME OUT
22
<DRB1451>
En
Description
Player unable to read TOC data.
Disc is rotating, but rotation cannot be
ascertained.
Player unable to play back currently
inserted disc.
The disc loaded cannot be played
properly.
Mechanical operation has failed to
complete within specified time
interval.
Possible cause and recommended action
Disc is cracked.
= Recommended action: replace disc.
Disc is soiled or dirty.
= Recommended action: clean disc.
If other discs play normally, the problem is with
the disc itself.
The disc format does not conform to MP3.
= Change to disc conforming to MP3 format.
Dust or some other form of foreign particles have
found their way into disc insertion slot.
= Recommended action: remove dust or other
foreign particles.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Djm-400

Inhaltsverzeichnis