Dvd Player (Dvd-E810) - Yamaha pianoCraft DVD-E810 Bedienungsanleitung

DVD player (DVD-E810)

Problem
Power turns on but The power cable is not connected or the
immediately shuts off. plug is not completely inserted.
Power immediately Auto-standby function of the receiver
shuts off during works when the receiver can not receive
playback. the playing signal transmitted from the
DVD player with the system control cable
for 30 minutes.
The TV (monitor) The component video signal output setting
does not show the may not match the video connection.
picture properly.
The color system setting of the DVD
player may not match the specification of
your TV.
The progressive scan mode may be used
with a TV that does not support it.
The disc being played back may not be
compatible with the DVD player.
Occasionally, a small amount of picture
distortion may appear depending on the
disc being played back. This is not a
malfunction.
The screen size of the The TV size setting of the DVD player to
TV or monitor looks
match the connection method.
strange (the image is
When the progressibe scan mode is
distorted or the
activated, image with a 4:3 aspect ratio are
subtitle is missing).
played back on a 16:9 wide television
screen.
No sound or distorted The sampling rate of a MP3 or WMA file
sound may not be compatible with the DVD
player.
No audio at digital Incorrect digital cable connections.
output
The disc being played back may not be
compatible with the DVD player.
The digital output settings of the DVD
player may not be set properly.
Cause
Connect the power cable firmly.
Check the connection of the system control cable
between the receiver and the DVD player.
Set "COMPONENT" of the DVD player to match the
connection method.
Check that the color system of your TV, and then set
"TV TYPE"of the DVD player to match it.
Set "PROGRESSIVE" to "OFF".
Check that the disc is compatible with the DVD
player.
Set "TV DISPLAY" of the DVD player to match your
TV, or check the screen size setting of your TV.
Set "TV DISPLAY" of the DVD player to adjust the
screen size. If you cannot adjust it, set
"PROGRESSIVE" to "OFF".
Check the sampling rate and bit rate of an MP3 or
WMA file are compatible with the DVD player.
Connect the digital cables properly.
Check that the disc is compatible with the DVD
player.
Set "DIGITAL OUTPUT" of the DVD player
according to your external audio equipment
connections.
Troubleshooting
Remedy
See
page
18
12
54
53
54
63
53
53
63
16
63
52
61
En