Basic Disc Playback Operations - Yamaha pianoCraft DVD-E810 Bedienungsanleitung

Follow the procedures below to carry out basic disc playback operations.
Notes
• If the inhibit icon ( ) appears on the TV when a button is
pressed, it means the function is not available on the current
disc or the current status.
• Depending on the disc, some operations may be different or
restricted.
STANDBY/ON
1 2
Number
5 6
keys
9 0
REPEAT
TV CH
MODE
TV INPUT
b a
,
ON SCREEN
PRESET
INFO.
A-E ENTER
SET UP
To start playback
Load the disc (press on the front panel of the DVD
player to open/close the disc tray).
y
• This unit automatically starts playback when a disc is loaded. In
case that the disc has the start menu, you may need to press
to start playback.
• For CDs, you can play back the first few seconds of each track
sequentially by pressing SCAN while the plalyback stops. Press
h
to return to normal playback.
To stop playback
Press s.
y
This unit automatically memorizes the stopping position when
playback is stopped. If you press
s
where it left off. If you press
will be cleared from the memory. (This is called "Stop mode".)
To pause playback
Press e.
To return to normal playback, press h.

Basic Disc Playback Operations

POWER
TV
3 4
7 8
SCAN DIMMER
SCAN
A-B
s
FREQ/TEXT
PROG
e
PTY SEEK
START
SHUFFLE
h
MENU
, ,
A-E
ENTER
TOP MENU
/RETURN
h
h
, playback resumes from
once again, the stopping position
To advance frame-by-frame
Press e to pause playback, then press e repeatedly.
Each time you press e, playback advances one frame at a
time. To return to normal playback, press h.
To fast reverse or fast forward
To fast reverse, hold down b for a few seconds.
To fast forward, hold down a for a few seconds.
Each time you press the button after holding down it, the
speed increases (decreases).
To slow reverse or slow forward
To slow reverse press . To slow forward, press
Each time you press the button, the speed increases
(decreases).
Note
The slow reverse feature is not available for VCDs and SVCDs.
To skip chapters (tracks)
To skip to the start of the current chapter (track), press
b.
To skip to the next chapter (track), press a.
To skip to the previous chapter (track), quickly press b
twice.
Note
The skip feature may not work properly when playing back a
VCD or SVCD using the PBC menu (see page 31).
To specify a chapter (track) for playback
Use the number keys to enter the chapter (track) number
you want to play.
To specify 1-digit number, press a number key to enter the
track number and then ENTER, or press 0 and then a
number key to enter the track number.
Note
This feature may not work properly when playing back a VCD or
SVCD using the PBC menu (see page 31).
Basic Disc Playback Operations
DVD VCD
DVD VCD
25
.
En