Explanation Of Symbols; Safety Information - Conrad 841148 Bedienungsanleitung

4. Explanation of Symbols

An exclamation mark in a triangle indicates important notes in these operating instructions
that must be strictly observed.

The „hand" symbol indicates special advice and operating information.

5. Safety Information

In case of damage caused by non-compliance with these operating instructions,
the warranty/guarantee will expire. We do not assume any liability for consequential
damage!
We do not assume any liability for damage to property or personal injury caused
by improper use or the failure to observe the safety instructions! In such cases
the warranty/guarantee will expire.
Dear Customer,
this safety information serves not only to protect the product, but also your own safety
and the safety of other persons. Therefore, read this chapter very carefully before taking
the product into operation!
• For safety reasons, any unauthorised conversions and/or modifications to the system
are not permitted.
• The system only serves as an aid for reversing. It does not release the driver from his
diligence obligation. Some obstacles may not or not reliably be recognised due to the
manner in which the device works. The manufacturer does not assume any liability
for damage that occurs in this case.
• The device function can be impaired by strong contamination or precipitation on the
camera unit.
• During installation and operation, observe the applicable approval provisions and the
road traffic ordinance.
• The device must only be used with the 12 - 24 V vehicle power supply (with the
negative terminal of the battery connected to the body of the vehicle). Never connect
the system to a different power supply.
21