BAC-PO-1414-Q11L
IMPORTANT MESSAGES
The appliance evaporates and distributes condensation through the exhaust hose.
1.
In COOLING mode, the drain pipe does not need to be installed. Ensure the rubber cap
locked on the drain hole when the appliance is in operation.
2.
In HEATING mode, pull out the rubber cap
efficiency.
3.
In DEHUMIDIFYING mode, pull out the rubber cap
remove the exhaust hose to ensure dehumidifying efficiency.
※ When the water tank is full, the <
the rubber cap
power button to restart the appliance.
②
of the bottom drain hole t
①
to install the drain pipe to ensure heating
①
to install the drain pipe, then
> display will show <E4> on screen. Remove
o release the water. After draining, press the
www.blaupunkt.com
23