Blaupunkt A1414L Bedienungsanleitung Seite 20

BAC-PO-1414-Q11L
(2) SLEEP function in COOLING mode:

The <

The temperature increases by 1 /2
After which, the temperature will remain unchanged.
(3) SLEEP function in HEATING mode:

The <

The temperature decreases by 1 /2
℃
4
(4) The SLEEP function is disabled in DEHUMIDIFYING mode.
V. Temperature Display Switching ( / ):
(1) The temperature display defaults to Fahrenheit ( ).
(2) In standby mode, press and hold the <
temperature display between Celsius ( ) and Fahrenheit ( ). The display flashes
<88> once on screen and produces one short beep to indicate the temperature
has switched.
VI. Protection
(1) Compressor Protection
The compressor stays off for 3 minutes or above before restarting.
(2) Defrost Protection
(a) The <
(b) The appliance defrosts when the internal temperature is too low until the
normal temperature is restored. The display will return to showing the
functions.
> indicator will light on.
> indicator will light on.
after 2 hours. After which, the temperature will remain unchanged.
> display will show <dF> on the screen.
℃ ℃
after an hour and 2 /4
℃ ℃
after an hour and decreases by 2 /
℃ ℃
℃
> key for 5 seconds to switch the
℃
www.blaupunkt.com
℃ ℃
after 2 hours.
℃
℃
20