Herunterladen Inhalt Inhalt Diese Seite drucken

Forced Settings In Programme Mode; Special Functions - Grundig THAURUS 51 Serviceanleitung

Inhaltsverzeichnis

Werbung

GRUNDIG Service
3.2 Hardware Equipment
3.2.1 Display type
Call up the "Tube type" menu via "EASY DIALOG" –>
"Installation" –> "Only for the retailer" –> Code number "8500" –>
"Hardware equipment".
Select the appropriate picture tube type / display type.
3.2.2 IF Type
Call up the "IF Type" menu via "EASY DIALOG" –> "Installation" –>
"Only for the retailer" –> Code number "8500" –> "Hardware equipment".
After replacing the NVM, it is necessary to adjust the IF type:
Inland sets:
National
Multi-8 sets:
Multi 8
Multi-9 sets:
Multi 9
(see Alignment, Point 2).
3.2.3 Tuner Type
Call up the "Terrestrial tuner" menu via "EASY DIALOG" –> "Installa-
tion" –> "Only for the retailer" –> Code number "8500" –> "Hardware
equipment".
Select the appropriate tuner type.
3.2.4 Remote Control
Call up the "Remote control" menu via "EASY DIALOG" –> "Installa-
tion" –> "Only for the retailer" –> Code number "8500" –> "Hardware
equipment".
Select "TP150" or "PR11".
3.2.5 Subwoofer
Call up the "Subwoofer" menu via "EASY DIALOG" –> "Installation"
–> "Only for the retailer" –> Code number "8500" –> "Hardware
equipment".
Select "yes" or "no".
3.2.6 Front-LED
Call up the "Front-LED" menu via "EASY DIALOG" –> "Installation"
–> "Only for the retailer" –> Code number "8500" –> "Hardware
equipment".
Select "3 Colors" or "1 Color".

3.3 Special Functions

3.3.1 Watchdog On/Off
Call up the "Watchdog" menu via "EASY DIALOG" –> "Installation"
–> "Dealer service menu" –> Code number "8500" –> "Special
functions".
If the Watchdog timer is not reset in regular intervals, a new start is
initialized.
Set the Watchdog to "off" or "on".
3.3.2 IR Data Programmer
Call up the "IR-Data programmer" menu via "EASY DIALOG" –>
"Installation" –> "Dealer service menu" –> Code number "8500" –>
"Special functions". Using the "OK" button, it is possible to store up to
99 programme positions with data for channel, TV standard, Peri, 6-
position station name, centre fine tuning, and "0" volume offset, with
the help of the IR data programmer.
3.3.3 AGC Setting
Feed in a standard channel raster without finetuning in band 1.
Call up the "AGC setting" menu via "EASY DIALOG" –> "Installation"
–> "Dealer service menu" –> Code number "8500" –> "Special
functions".
Adjust the value so that the picture is just free of noise.
(see Alignment, Point 4).
3.3.4 Cancel EPG Flash
Call up the "Cancel EPG flash" menu via "EASY DIALOG" –> "Instal-
lation" –> "Dealer service menu" –> Code number "8500" –> "Special
functions".
Pressing the "OK" button will clear the EPG Flash.
3.3.5 Teletext Level 2.5 Support
Call up the "Teletext level 2.5" menu via "EASY DIALOG" –>
"Installation" –> "Dealer service menu" –> Code number "8500" –>
"Special functions".
Select "yes" or "no".
4. Sound Settings
Press the "blue" button to call up the "Sound" menu.
The settings "Speech", "Music" or "manual" can be selected in the "Defaults"
menu.
The "Manual" setting allows you to adjust the sound to suit your taste. For the
other settings, specific values are preprogrammed.
5. Picture Settings
Press the "red" button to call up the "Picture" menu.
- In the "Defaults" menu, the settings "Day", "Night", and "Manual"
can be selected.
With the "Manual" option, you may set the contrast and the picture
sharpness. For the other settings, specific values are prepro-
grammed.
- In the "Tilt angle" menu brightness/contrast can be adjusted accor-
ding to the viewing angle.
6. Settings via the Channel Allocation

6.1 Forced Settings in Programme Mode

Call up the "Sound channel" menu via "EASY DIALOG" –>
"Preset List" –> "green button" –> "Edit channel settings".
You may select between "Automatic", "Mono", "Mono B" and
"Mono C".
Mono B = Original sound track
Mono C = For digital sound reception (Nicam).
7. Factory Settings
Press the " ", "red" and OK buttons to call up the factory settings.
1 - 24
THARUS 51 LCD 51-9310 DOLBY

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Lcd 51-9310 dolbyGba5200Gba5200 vnm

Inhaltsverzeichnis