Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

GRUNDIG Service
Menüpunkt
Service Menü
Point of Menu
Service Menu
P+
/
P–
R. CUT
G. CUT
B. CUT
R. DRV
G. DRV
B. DRV

BACKLIGHT

* Wert gegebenenfalls so verändern, dass die dunklen Bildberei-
che eines Grautreppentestbildes unbunt sind.
** Wert gegebenenfalls so verändern, dass die hellen Bildbereiche
eines Grautreppentestbildes unbunt sind.
2. Austausch der Hauptplatte oder des U506
Nach dem Austausch der Hauptplatte oder des U506 sind Grund-
einstellwerte im Service Mode entsprechend der Tabelle einzustel-
len.
3. Software-Versionsnummer
Die Software-Versionsnummer wird nach dem Beenden des Ser-
vice Modes angezeigt, z.B.:
SL4
TEST:04 05/03/04
3. Programmsuchlauf
– Taste "MENU" (Hauptmenü) drücken.
– "SUCHLAUF / ABSTIMMUNG" mit den Tasten
– "PROGRAMMSUCHLAUF" mit den Tasten
– Land mit den Tasten
P+
/ P–,
OK bestätigen.
Das automatische Sendersuchsystem stoppt bei jedem emp-
fangswürdigen Sender (AFC und Koinzidenz) und speichert auto-
matisch die entsprechenden Senderdaten mit dem jeweiligen
Standard. Danach wird der Suchlauf fortgesetzt.
Zum Abbrechen des Suchlaufes die Taste "MENU" drücken.
Einstellung
Adjustment
/
Cut off-Wert "rot" / Cut off value "red"
0...255
Cut off-Wert "grün" / Cut off value "green"
0...255
Cut off-Wert "blau" / Cut off value "blue"
0...255
Weißabgleich "rot" / White balance "red"
0...255
Weißabgleich "grün" / White balance "green"
0...255
Weißabgleich "blau" / White balance "blue"
0...255
Hintergrundbeleuchtung / Backlight:
0 = hell / bright
0...4
4 = dunkel / dark
15G-01
P+
/
P–
anwählen.
P+
/
P–
anwählen.
/
auswählen und mit der Taste
Hinweis
Hint
* If nesessary change the settings so that the dark part of the
greyscale test pattern is achromatic.
** If nesessary change the settings so that the bright part of the
greyscale test pattern is achromatic.
2. Change the Main Board or the U506
After changing the Main Board or U506 all basic settings in the ser-
vice mode must be done according to the table.
3. Software Version Number
The software version number is shown after ending the service
mode, e.g.:
TEST:04 05/03/04
3. Programme Search
– Press button "MENU" (Main Menu).
– Select "SETUP" with the buttons
– Select "AUTOPROGRAM" with the buttons
– Select the Country with the buttons
with button OK.
The autoprogram system stops at every station of acceptable re-
ception quality (AFC and coincidence) and stores the station data
and the respective standard automatically. The system then con-
tinues searching.
Pressing the "MENU" button stops the programme search.
1 - 8
AMIRA 38
SL4
15G-01
P+
/ P–.
P+
/ P–.
P+
/ P–,
/
and confirm
5*
5*
0*
0**
0**
0**
0

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Lcd 38-9410 topGbb2500

Inhaltsverzeichnis