Changing The Blade - Parkside PUS 4 A1 Bedienungsanleitung Und Sicherheitshinweise

■ Children should be supervised to ensure that they do not play with the
appliance.
■ Never leave children unattended with the packaging material or the
product. There is a risk of suffocation from plastic packaging and risk
of death due to cuts. Children frequently underestimate the dangers.
Keep children away from the packaging materials and the product.
■ Do not touch the blades with your bare hands. There is a risk of injury.
■ Do not twist the cutters when cutting. The blade may break and jump in
all directions.
Wear safety goggles and protective gloves when using the
■
product!
■ Make sure that you have a secure footing while working. Failure to
do so can lead to serious injury.
Use
♦ To open the cutters, turn the safety lock clockwise towards the
(see figure 1).
♦ Always close the cutters when not in use and secure them against unin-
tentional opening. To do so, turn the safety lock anticlockwise towards
the symbol (see figure 2).

Changing the blade

♦ Open the storage compartment in the handle and remove the hex
key (see figure 3).
♦ Using the hex key, undo the two locking screws and pull the blade
downwards out of the holder (see figure 4).
♦ Take a new blade out of the storage compartment and place it in the
holder. Fix the blade in place by tightening the locking screws with the
hex key (see figure 5).
♦ Replace the hex key in the storage compartment and fold it back into
the handle (see figure 6).
- 5 -
symbol