Transportation, Storage And Disposal; Disposal Of The Product - Husqvarna ER 105 Bedienungsanweisung

Problem Cause
The current is The work temperature is too
too high. low.
There is interference between
products.
The product is not attached cor-
rectly.
The centrifugal force is too
high.
The product is too small for the
work.
Transportation
Put the product on a pallet and use a forklift to move it.
Storage
• Clean the product before storage.
• Keep the product in a dry and frost-free area.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.

Disposal of the product

• Obey the local recycling requirements and applicable
regulations.
• When the product no longer is used, send it to the
dealer or discard it at a recycling location.
16

Transportation, storage and disposal

Inspection
N/A
N/A
N/A
N/A
N/A
Solution
Decrease the centrifugal force
until the temperature increases.
Adjust the positions of the prod-
ucts.
Attach the brackets correctly to
the concrete form.
Attach the product with the cor-
rect bolts to the brackets.
Adjust the centrifugal force.
Replace the product.
1586 - 001 - 26.03.2021