Herunterladen Diese Seite drucken

Beko BEEPA 090 Bedienungsanleitung Seite 4

Homewhiz function

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
1
HomeWhiz function
Using the AC on multiple
devices
You can use more than one mobile device to
control your air conditioner. This requires installing
HomeWhiz also on the second mobile device. You
will be prompted to sign in with your account when
you open the app.
If you are signed in with the same
C
account you added the appliance, you
can start using your air conditioner
right after signing in.
Follow the steps below to use a new account with
an already configured AC:
1. Create a new account to sign in with to
HomeWhiz app. Make sure your mobile device
and your AC are on the same network.
2. On the Appliances tab, tap "Add/Remove
Appliance". You can see the appliances along
with the owner information at the bottom of
the "Other Appliances" tab.
3. Tap the (+) icon next to the AC you want to add,
then enter a name for your appliance.
4. This sends an e-mail to the owner about your
request. Once the owner approves it, you can
start using the appliance together.
After installation is complete, your
mobile device and your air conditioner
C
do not need to be connected to the
same network. You can use your
appliance as long as your mobile
device has internet connection.
Too see appliances paired with
C
your account, tap "Add/Remove
Appliance" from the "Appliances"
tab on the app. Here, you can assign
appliances to users.
Deleting HomeWhiz settings
HomeWhiz settings can be deleted from the app
by following the relevant in-app instructions.
4 / EN
Troubleshooting HomeWhiz
If you are having trouble controlling or connecting
your product, follow the steps below. Proceed to
the next step if the action does not resolve your
issue.
1. Check whether your mobile device has internet
connection.
2. Close and re-launch the HomeWhiz app on your
mobile device.
3. Restart your mobile device.
4. If you are still having issues with connection,
repeat the initial setup settings from the
appliance.
5. If the problem persists, please reach out to an
authorized service provider.
Manual Control Options
HomeWhiz manual control options were shown as
below;
Operation Mode: Auto, Cooling, Heating,
Dehumidification, Fan
Target Temperature: In the range of 17-30 °C
Fan Speed: Auto, Low, Medium, High
Wireless Network Module
Features
Frequency Range
Output Power (Max)
C
HomeWhiz operates in the 2.4GHz
frequency band.
When wireless network module is
C
operating, it is recommended that
a minimum distance of 20 cm be
maintained between the user and
the device
Air-Conditioner / User Manual
2412 - 2484 MHz
IEEE 802.11b: 20 dBm
IEEE 802.11n: 14 dBm

Werbung

loading