Correct Handling Of The Battery Charger - Parkside PAPK 12 A2 Originalbetriebsanleitung

GB MT
Special safety directions
for battery-operated
tools
• Ensure that the device is
switched off before insert-
ing the battery. Inserting a
battery into a power tool
that is switched on may
result in accidents.
• Recharge the batteries
indoors only because the
battery charger is designed
for indoor use only.
• To reduce the electric shock
hazard, unplug the battery
charger from the mains be-
fore cleaning the charger.
• Do not subject the battery
to strong sunlight over long
periods and do not leave it
on a heater. Heat damages
the battery and there is a
risk of explosion.
• Allow a hot battery to cool
before charging.
• Do not open up the battery
and avoid mechanical
damage to the battery. Risk
of short circuit and fumes
may be emitted that irritate
the respiratory tract. Ensure
fresh air and seek medical
assistance in the event of
discomfort.
• Do not use non-rechargea-
ble batteries!
46
Correct handling of
the battery charger
• Keep the equipment away
from children and pets.
Children must be super-
vised to ensure that they do
not play with the device.
• Before each use, check the
charger, cable and plug
and have them repaired by
qualified professionals and
only with original parts. Do
not use a defective charg-
er and do not open it up
yourself. This ensures that
the safety of the device is
maintained.
• Connect the charger only to
a socket with an earth. En-
sure that the mains voltage
matches the specifications
on the charger rating plate.
Risk of electric shock.
• Disconnect the charger
from the mains before clos-
ing or opening connection
to the battery / power tool
/ device.
• Keep the charger clean and
away from wet and rain.
Do not use the charger out-
doors. Dirt and the entry of
water increase the risk of
electric shock.
• Operate the charger only
with the appropriate orig-
inal batteries. Charging
other batteries may result in
injuries and risk of fire.