Warranty - boska Cheese Blocker Pro Bedienungsanleitung

EN
REPLACING THE CUTTING WIRE
Cutting wire replacements are available on www.
boska.com
• Using the supplied M5 hex screwdriver, loosen the
bolt as shown here.
• This will lower the tension on the wire, allowing
you to remove the wire.
• Place the new wire and fasten the bolt using the
hex screwdriver, until the tension is restored.
• Pay attention! There should be some tension on
the wire, but if pushed against it should bend
slightly.
• Pay attention! Make sure all the wire loops are
positioned against their respective screw head, so
they are aligned.
The conditions for warranty on professional cheese tools can be found on

Warranty

www.en.boska.com/garantee