Herunterladen Inhalt Inhalt Diese Seite drucken

English; Important Safety Instructions - Honeywell HA120E Gebrauchsanweisung

Luftreiniger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

1. Before using this appliance, read through all the instruc-
tions and only use accordingly.
2. This appliance is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they
do not play with the appliance.
3. If the supply cord is damaged, the manufacturer, their
service agent or a similarly qualified person should
replace it to avoid a hazard.
4. This appliance requires regular cleaning. Refer to the
CLEANING instructions provided.
5. Do not expose the air purifier to rain, or use near water, in
a bathroom, laundry area or other damp location.
6. The air purifier must be used in an upright position.
7. Do not allow foreign objects to enter air inlet or outlet
grilles as this may cause electric shock or damage to the
air purifier.
COMPONENTS See page 4.
1. a ir outlet grille
2. c ontrol panel
3. a ir inlet grille
4. p re-filter
5. p urification filter (2)
CONTROL PANEL See page 4.
6. on / off switch
7. o scillation switch
8. fi lter cleaning indicator
OPERATING INSTRUCTIONS See pages 4- 5.
Place the unit on a flat level surface and position 1 metre
from walls or furniture. Plug the unit in and press the
power
button (6 - Fig. 1). The unit will start at
medium speed and then change to the low speed. To
select the different cleaning speeds press the power
button again.
Oscillation
To turn Oscillation on, press the Oscillation button
( 7 - Fig. 1).
To turn Oscillation off, press the button again.
Filter cleaning light
When the filter needs to be cleaned, the filter cleaning light
(8 - Fig. 1) will illuminate. It will remain illuminated until
it is RESET.
This feature operates based on the number of hours of use.
In general the filter needs to be cleaned once a month.
After cleaning the filter the filter cleaning light needs to be
re-set.


Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis