Troubleshooting; Malfunction Causes And Remedies; Cleaning; Storage When Not In Use - Parkside PFRS 1,5 B3 Bedienungsanleitung

Troubleshooting

In this chapter you will receive important informa-
tion for malfunction localisation and malfunction
remedies.

Malfunction causes and remedies

The following table will help with localising and
remedying minor malfunctions:
Defect
The wax melter
tip does not
get hot.
NOTICE
► If you cannot solve the problem with the
aforementioned solutions, please contact the
Service Hotline (see chapter Service) .

Cleaning

CAUTION
Damage to the appliance!
► Ensure that, when cleaning it, no moisture can
penetrate into the appliance, so as to avoid
irreparable damage to it.
► Do not use chemical or abrasive cleaning
agents. These could damage the housing.
♦ Clean the wax melter
tip
they have cooled down.
♦ Scrape the wax residue off the wax melter tip
using the scraper with curvature

Storage when not in use

If you do not intend to use the appliance for an
extended period of time, remove the batteries.
Store all parts of the tile repair kit in the storage
case and in a clean, dry location out of direct
sunlight.
PFRS 1,5 B3
Possible
cause
The batteries
have been
inserted
incorrectly.
The bat-
teries are
discharged.
with the cleaning cloth
Solution
Insert the bat-
teries into the
wax melter
as indicated in
the battery com-
partment
Insert two new
batteries.
and the wax melter
only when
.
GB │ CY │
.
9 ■