Endress+Hauser Tankvision Tank Scanner NXA820 Handbuch Seite 219

Tankvision
Endress+Hauser
Diagnose-Code Kurztext
F329 All Gauges failed
F330 Connection lost
with Primary unit
F331 Connection lost
with Secondary
unit
F332 Module restarted
often
F333 One or more
Gauges failed
C485 Simulation Mode
On
C486 Manual Switch
Over ON
C487 Redundancy
activated
C488 Unit is active
C489 Unit is passive
F501 Database Fault
F502 Not Configured
C503 HART Tunneling
F504 Subscrip. Store
M505 Time Server
C506 Field Scan Off
C507 Interface Off
Ursache
All connected gauges are failed. Valid only
when redundancy is activated and
redundancy is configured as Switch by
Interface
Secondary redundant unit lost the
connection with Primary redundant unit
Primary redundant unit lost the connection
with Secondary redundant unit
Module is restarted more 5 times
One or more connected gauges have failed.
Valid only when redundancy is activated
and redundancy is configured as Switch by
Gauge
Field scan simulation mode is activated
Redundancy Manual Switch Over is
activated.
Redundancy feature is activated.
Redundant unit is active. i.e. field scan is
active.
Redundant unit is passive. i.e. field scan is in
standby mode
Database Failure
LAN Has Not Been Configured
Gauge Configuration In Progress
Subscription Store Cannot Be Found
–
The field scan has been stopped
The hostlink interface has been stopped
Menü "Systemadministration"
Mögliche Lösung
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
219