How To Use The Appliance - Whirlpool DE20W5252 Gebrauchsanweisung

HOW TO USE THE APPLIANCE

FIRST-TIME USE
After transporting or handling the appliance, wait one
hour, before connecting it to the power supply, make
sure that the appliance rests in the upright position,
on a stable, and flat surface to prevent leakages. Use
the retractable handle to keep the unit as upright as
possible, never on its side. Leave an appropriate gap as
indicated in the "INSTALLATION GUIDE" paragraph. When
OPERATING MODE DESCRIPTION
Switching the appliance on/off
After connecting the appliance to the power
supply, press POWER button
ON/OFF the appliance. The button can be found on the
right hand side of the control panel (1). After pressing
the POWER button, the dehumidifier emits 1"beep"
Selecting the Mode
Press the DEHUMIDIFY MODE button
(12) to select the operating Mode: Normal,
Continuous, 6
Whenever the DEHUMIDIFY MODE button
DEHUMIDIFY
MOOE
is pressed, the operating mode, changes
sequentially:
Normal, ->Cont, ->6 sense , ->Laundry.
th
It starts from the last mode memorized.
Normal Mode: When Normal indicator (31) lights up,
the appliance operates in Normal mode. Allows manual
setting of both fan speed and desired humidity level.
Continuous Mode: When the Cont. indicator
(29) lights up, the appliance operates in Cont.
mode. Automatically sets the fan low speed and the
dehumidifier will run continuously
Set humidity level is unable.
6 sense Mode: when the 6
th
lights up, the appliance operates in 6
appliance
automatically adjusts the fan speed according to the
humidity
level in the room. When unit initially enters 6
mode, the fan and the compressor are working
according to the following:
Ambient Humidity Compressor Status
≥ 65% On
50%<Ambient Humidity <65% On
≤5 0% Off
(11) to turn
sense,Laundry program.
th
sense indicator (27)
th
sense mode. The
th
sense
th
Fan Speed
High Fan Speed
Low Fan Speed
Low Fan Speed
the bucket is full or not inserted properly, the Water
Full indicator (20), full bucket indicator lights up and
stops the appliance (read the "Water bucket full function"
paragraph). Do not insert small objects, as these are
dangerous and could causes damage.
NOTE: to avoid potential fire hazards, ensure that the
filter is installed before operating the appliance.
Laundry program Mode: when the Laundry program
indicator (25) lights up, the appliance operates in the
Laundry program mode. The appliance will continue to
dehumidify and keep in high fan speed. The fan speed
and humidity level cannot be adjusted in the Laundry
program mode. The Laundry program mode is suitable
for drying clothing.
Setting the humidity level
Press the "HUMIDITY SETTING " button
(13) to set the desired relative humidity
level between 30% - 80% during normal
HUMIDITY
SETTING
dehumidify mode. The "%" indicator % (26)
in LED display light will flash when changes are being
made.
The dehumidifier will turn off when the room reaches
this target humidity level.In the Continuous Mode, the
HUMIDITY Mode,6
SETTING button is not available .
Setting the Fan Mode
Press the FAN (14) button to select FAN
Mode. The
display lights up. The unit turns off the
FAN
dehumidifying function and circulate the
air. The fan speed can be adjusted between "HIGH"
and LOW using the FAN SPEED
Setting the Sleep Mode
Press the "SLEEP"
SLEEP Mode. The
turns on. In SLEEP MODE, the display lights will
SLEEP
be turned off, the unit will continue to work.
Setting the Fan Speed
Press the FAN SPEED button
the different fan speed. The indicator
(24)in the LED display lights up.
FAN SPEED
When in the Fan Mode and Normal mode, can
press the Fan Speed button to set High/Low fan speed.
- 15 -
Sense mode and Laundry program
th
(32) indicator in the LED
(16) button.
(15) button to select
(22) indicator in the LED
(16) to select
(23) or