Epson ELPLX03 Bedienungsanleitung Seite 5

• Do not attach the lens unit when the projector's lens insertion section is facing up. Dust or
dirt could enter the projector.
• Try not to touch the lens section with your hand or fingers. If fingerprints or oils are left on
the surface of the lens, projection quality deteriorates.
• To remove dust on the lens, blow it off using a blower.
• To clean any dirt on the lens, wipe it off gently with a soft cloth.
• Do not use any hard materials to clean the lens and do not subject the lens to any impacts.
• Do not touch or pull the connector part or the cable as this could cause a malfunction.
• When cleaning this product, do not use a wet cloth or solvents such as alcohol, benzene, or
thinner as this could cause an electric shock or a malfunction.
• Do not open or eat the desiccant that comes with the lens unit. If it gets into your eyes or
mouth, flush them immediately with water. If discomfort or vision problems continue after a
thorough flushing, see a doctor immediately.
• Attach the cover to the lens unit, and place it on its side on a stable surface. Failure to do so
may cause the lens unit to fall causing a malfunction or damage.
Projector Information
• When you use the lens unit with the following projector models, update the projector firmware
to V105 or later:
EB-L30002U, EB-L30000U, Pro L30002U, Pro L30000U
You can check the firmware version using the projector menu.
[Info] - [Version] - [Main]
• When you use the lens unit with the following projector models, contact Epson for help:
EB-L25000U, Pro 25000U
Caution
中
文
简
体
中
文
繁
体
日
本
語
5