Herunterladen Inhalt Inhalt Diese Seite drucken

Blaupunkt tha 280 Bedienungs- Und Einbauanleitung Seite 3

Inhaltsverzeichnis

Werbung

Level Regler
Mit Hilfe des Level Reglers kann die Eingangs-
empfindlichkeit der Endstufe an die Ausgangs-
spannung Ihres Autoradio- Vorverstärkerausganges
angepasst werden.
Der Einstellbereich reicht von 0,3 V bis 8 V.
Bei Anschluss eines Autoradios anderer Hersteller
ist die Eingangsempfindlichkeit entsprechend den
Herstellerangaben anzupassen.
Hierzu noch einige wichtige Erläuterungen:
Durch Drehen des Reglers im Uhrzeigersinn erhöht
sich die Eingangsempfindlichkeit des Verstärkers und
damit auch die Lautstärke. Es handelt sich jedoch
nicht um eine Lautstärkeregelung; in der Endposition
läßt sich keine höhere Verstärkerleistung erzielen,
auch wenn sich dies zunächst so anhört. Das Sy-
stem steigert lediglich schneller die Lautstärke, wenn
die Lautstärkeregelung des Radiogerätes aufgedreht
wird.
Lautsprecheranschlüsse
(Falls der Verstärker in Brücke geschaltet werden soll,
an dieser Stelle direkt mit dem Abschnitt „Überbrückte
Lautsprecheranschlüsse" fortfahren).
Wie bei jeder Audiokomponente ist die korrekte
Polung von Verstärker und Lautsprechern von es-
sentieller Bedeutung für eine gute Basswiedergabe.
Deshalb ist bei den Anschlüssen darauf zu achten,
dass der positive (+) Anschluss des Verstärkers mit
dem positiven Anschluss (+) des Lautsprechers
verbunden wird; entsprechendes gilt für die negativen
(-) Anschlüsse. Außerdem muss der linke Verstärker-
kanal mit dem linken Lautsprecher und der rechte
Verstärkerkanal mit dem rechten Lautsprecher ver-
bunden werden.
Überbrückte Lautsprecheranschlüsse
Der THA-Verstärker kann für eine Monokonfiguration
auch in Brücke geschaltet werden. Auf diese Weise
kann der Verstärker für einen oder mehrere
Subwoofer bzw. einen Mitteltöner verwendet werden.
In dieser Konfiguration addiert der Verstärker den
rechten und linken Kanal zu einem Einkanalausgang
(Monoausgang).
Hinweis:
Der Verstärker kann die rechte und linke Signal-
information nur dann addieren, wenn sowohl der rech-
te als auch der linke RCA-Anschluss vorgenommen
wurde.
Achtung:
In Brückenschaltung muss die Verstärkerlast
4 Ohm oder höher betragen. Eine niedrigere Last
führt zu einer Überhitzung oder Abschaltung des
Verstärkers und kann dauerhafte Schäden verur-
sachen.
Art und Bereich der Frequenzübergänge
einstellen
Beim THA 280 kann die Art des Frequenzübergangs
(d. h. „Low-Pass" oder „Hi-Pass") und die gewünschte
Einstiegsfrequenz eingestellt werden. Wenn bei-
spielsweise ein Subwoofer-Paar angeschlossen wer-
den soll, sind die abgebildeten „Low-Pass"- Einstel-
lungen erforderlich (Fig. 3). Die Einstiegsfrequenz ist
abhängig vom Frequenzbereich der Lautsprecher
(siehe empfohlener Frequenzbereich der Lautspre-
cher).
„High- Pass"
Bei der Einstellung von 250 Hz hat der Verstärker
einen Frequenzbereich von 250 Hz bis 30.000 Hz.
„Low- Pass"- Frequenzregelung
Dieser Regler ist aktiv, wenn sich der Schalter in der
Position „Low-Pass" befindet, und ermöglicht die Ein-
stellung der gewünschten Einstiegsfrequenz. Bei-
spiel: Bei einer Einstellung von 150 Hz hat der Ver-
stärker einen Frequenzbereich von 10 Hz bis 150 Hz.
Bass Boost
Mit Hilfe des Bass Boost Reglers kann die
Basswiedergabe des Verstärkers eingestellt werden.
Der Einstellbereich reicht von 0 dB bis +12 dB.
LPL REMOTE
Anschluss für die beiliegende Kabel-Fernbedienung
(5 m).
Hiermit ist die komfortable Fernbedienung des Bass-
pegels möglich (siehe Fig. 6).
Für die Nutzung der Fernbedienung ist der Be-
trieb mit Tiefpassfilter Voraussetzung (Crosso-
ver Schalter auf Position LP).
OFF/ON Schalter > ON
Betriebsanzeige
(POWER / PROTECTION)
Grünes Licht: Endstufe an, regulärer Betriebszu-
stand.
Rotes Licht:
Endstufe ist elektronisch abgeschal-
tet, da Fehlerfall vorliegt.
Änderungen vorbehalten!
ENGLISH
Introduction
Congratulations on your purchase of a high-quality
THA power amplifier. By selecting the THA 280 you
have chosen a product which delivers superlative
reproduction quality. Whether you are upgrading an
existing system or using the THA power amplifier in
a new system, you are certain to notice immediate
performance benefits!
The Blaupunkt editors are constantly working on
making the operating instructions clearer and easier
to understand. However, if you still have any ques-
tions on how to operate the equipment, please con-
tact your dealer or the telephone hotline for your coun-
try. You will find the hotline telephone numbers printed
at the back of this booklet.
We provide a manufacturer guarantee for our prod-
ucts bought within the European Union. You can view
the guarantee conditions at www.blaupunkt.de or
ask for them directly at:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim
Germany
Recommendation:
A power amplifier's performance is only as good as
its installation. Proper installation will maximise the
overall performance of your audio system. We rec-
ommend that you have our product installed profes-
sionally. Should you decide to install the amplifier
yourself, however, please read through these instruc-
tions carefully, and take your time over the installa-
tion.
Finally, a word about your health: please bear in mind
when playing music in your car that sustained sound
levels above 100 dB can damage your hearing and
may even result in total hearing loss. Modern high-
performance systems and high-quality loudspeaker
configurations are quite capable of generating noise
levels above 130 dB.
Safety precautions
Instructions for installation and
connection
Fit a fuse in the amplifier power line no more than 30 cm
from the vehicle battery, in order to protect the bat-
tery in the event of a short-circuit between it and the
power amplifier. The amplifier's own fuse protects the
THA 280
amplifier itself, but not the car battery. Disconnect
the negative terminal of the battery before carry-
ing out installation and connection work.
Observe the vehicle manufacturer's safety instruc-
tions (regarding airbags, alarm systems, trip comput-
ers, vehicle immobilisers).
The final stage must be installed professionally for
reasons of safety. The mounting surface must be
suitable for the screws provided, and must provide
firm support. For safety reasons the THA 280 should
be fixed in a reliable way. You must not install the
THA 280 on the rear shelf, on the rear seats or on
any other surface open to the front.
When drilling holes, take care to avoid damage to
vehicle components (battery, cables, fuse boxes).
Fit the amplifier in a suitable location, e.g. beneath
the seats or in the trunk (Fig. 1). The mounting loca-
tion must also be dry, and provide sufficient ventila-
tion for cooling of the amplifier. Use cable grommets
when passing cables through holes with sharp edges.
Use loudspeakers with an impedance of 2 to 4
(see table or installation drawing). Observe the max.
power handling specifications (music output). Do not
connect the loudspeakers to ground; only use the
terminals provided. The cross-section of the posi-
tive and negative cable must be at least 6 mm
THA 280 amplifier
The amplifier is suitable for connection to car radios
with Cinch connector.
Use the Blaupunkt ISO Cinch adapter to connect
the amplifier to car radios with ISO connector
(7 607 893 093 / 7 607 855 094).
Applications and loudspeaker connection
Stereo-Mode
Max Power
2 x 200 Watt / 4 Ω
Fig. 4, 4a
Mono-Mode
Max Power
1 x 600 Watt / 4 Ω
Fig. 5
Stereo-Mode
Max Power
2 x 300 Watt / 2 Ω
Fig. 4, 4a
Stereo-Mode
RMS Power
2 x 80 Watt / 4 Ω
Fig. 4, 4a
Mono-Mode
RMS Power
1 x 240 Watt / 4 Ω
Fig. 5
Stereo-Mode
RMS Power
2 x 120 Watt / 2 Ω
Fig. 4, 4a
Frequency
response
10 Hz - 30.000 Hz
Signal-to-noise
ratio
> 100 dB
2
.
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis