Installation - Icy Box IB-EW205B-T Handbuch

Preparation
Requirements
Required tools
Recommendation
Note before assembly
Please check all of the components shown in the component
checklist. If any of the components are missing or damaged,
contact your point of purchase for a replacement.

Installation

Make sure there is enough space for assembly and spread out a blanket if necessary.
• Place the table top (not included in the scope of delivery) carefully with the top side on the blanket.
• Place the crossbar (A) and the side brackets (B) on the tabletop (bottom side).
• Attach the side brackets (B) to the end of the crossbar (A). (No screws are used in this step.)
Note: The drawings of both of the crossbar and side brackets show the backside of the components. Please make sure the crossbar and side brackets keep
facing down while installation, which is convenient for the further steps.