Technical Data - Kärcher 18/25 Bedienungsanleitung

The safety circuit of the battery pack prevented exces-
sive current consumption.
1. To unlock, remove the battery pack from the device
until the temperature symbol disappears and insert
it again.
If the temperature symbol does not go out after 30 sec-
onds:
1. Connect the battery pack to the charger to unlock it.
Display shows remaining run time 0, device switch-
es off
The battery pack is discharged.
1. Charge the battery pack.
Electrical connection
Battery pack nominal voltage
Battery platform
Compatible with battery platform
Battery pack type
Rated capacity (according to IEC/EN 61960) Ah 2,5
17
Display shows no remaining capacity
The battery pack is discharged.
1. Charge the battery pack.
Display shows a remaining capacity of 70%, even
though the battery pack has been fully charged
The battery pack is in automatic storage mode. The
storage mode is activated if the battery pack has not
been used for more than 21 days. This function protects
the battery cells against rapid ageing and increases
their service life.
1. Fully recharge the battery pack before next use.
18/25 18/50
V 18 18
Battery Pow- Battery Pow-
er er
Battery Pow- Battery Pow-
er + er +
Li-ION Li-ION
5,0
English
Storage faults

Technical data

36/25 36/50
36 36
Battery Pow- Battery Power
er
Battery Pow- Battery Power +
er +
Li-ION Li-ION
2,5 5,0