Herunterladen Inhalt Inhalt Diese Seite drucken

Applied Functions; Canned Cycle Function (Lh71A Only) - Sony LH71A Bedienungsanleitung

Anzeigeeinheit
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

8. Applied Functions

8-1. Canned Cycle Function (LH71A only)

The following items have the same operating procedure with the canned cycle function.
1
Use the
key to make the lamp start flashing, and then press the
(lamp lights up).
2
The entered parameters are displayed.
Use the numeric keys to enter the value.
Use the
key to cancel.
Use the
key to finalize and move to the next option.
Use the
key to return to the previous option.
3
The display returns to the value indicator after you are finished entering the parameters. Move to the
position where you want execution to start, and then press
4
Move so that the number becomes zero, and when the count value for all axes reaches the target value
±3, the NEXT lamp flashes, and you can proceed to the next step.
5
Press the
key to display the next set of coordinates, and repeat the same operation.
6
Finally, when all steps have been completed,
mode.
• To use again, move to the next start position, and execute in the same way.
• To change any parameters, press the
• The program cannot be executed unless all the parameters are provided.
• To end machining before completion, press the
value for that position is displayed. To perform machining again, start from step 1.
• The Canned Cycle Function does not work during the φ (diameter) display.
LH71A / LH72
key (RUN flashes t RUN lights up).
is displayed (for 2 seconds), and the system exits the
key (or
key) to display the parameters, and then enter.
key.
is displayed, and then the incremental
key to finalize the setting
8-1
(E)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Lh72Lh71a-3t01

Inhaltsverzeichnis