Addition Display Selection; Preset Mode - Sony LH71A Bedienungsanleitung

7-2-5. Addition Display Selection (When LH71A Lathe Function is Selected or for
LH72 Only)
These operations can be performed when the mode lamps are not lit.
How to cancel: Press the
See "5-4. Verifying Count Values during Addition Display".

7-2-6. Preset Mode

<Setting the preset values>
1
Press the key. (
2
Press the key corresponding to the axis to be set.
3
Use the numeric key to enter the value.
4
Use the key to finalize the setting.
The current value becomes the set preset value.
5
<Setting the next preset values (max 3 values for each axis)>
Press the key corresponding to the axis to be set.
Press the key.
Perform step 3 and 4.
6
Press the key.
The system exits the preset mode. (
<Calling a preset values>
1
Press the key. (
2
Press the key corresponding to the axis to be called.
The preset value is displayed.
When multiple preset values are set, press the
display the next value.
3
Press the key.
The preset value is finalized, and the current value becomes the
set preset value.
4
Press the key.
The system exits the preset mode. (
n
The INC indication remains on during preset mode.
LH71A / LH72
key when selecting axis (the axis label will be flashing).
lamp lights up)
lamp goes out)
lamp lights up)
key to
lamp goes out)
Display
(Current value
display)
(Example:
10.000)
Display
(Current value
display)
7. Operation Method
7-3
(E)