Operation Method; How To Perform Key Operations - Sony LH71A Bedienungsanleitung

7. Operation Method

7-1. How to Perform Key Operations

x x x x x
Basic operations
To enter a mode
: Preset mode
: Datum point mode
: Reference point mode
To enter a value
Select axis
Numeric keys Value input
Finalize
Other
methods
Entry example: Entering "2.000"
Example 1 t
t
t
Example 3 (after 0.500 is entered) (
Enter
t
t
t
To edit
Edit mode
Select number
Select axis
Numeric keys Value input
Finalize
Exit
Other
methods
To exit a mode
Mode exit
LH71A / LH72
Press the mode key to enter the respective mode (lamp lights up).
Use the key to select the axis (axis label flashes).
Use the numeric key to enter the value (see entry example).
Use the key to finalize the setting.
• After selecting with the
value (flashing) to be changed. That value only can be changed.
• If you press another select axis key instead of the
finalizing the setting, the current value is finalized, and entry can be
made for the selected axis.
(or ) Example 2
(or )
)
using the operations in examples 1 and 2
Use the key to set to numerical value edit mode. (EDIT flashes)
(The number is displayed for approx. 1 s.)
The number to be edited can be selected by pressing the
key. (The number is displayed for approx. 1 s.)
Use the key to select the axis.
Use the numeric key to enter the value (see entry example).
Use the key to finalize the setting.
Use the key to exit edit mode (EDIT goes out).
• After selecting with the
digit (flashing) to be changed. That value only can be changed.
• If you press another select axis key instead of the
finalizing the setting, the current value is finalized, and entry can be
made for the selected axis.
Press the mode key to exit the respective mode (lamp goes out).
Pressing another mode key directly exits the current mode and enters the
new mode.
key, use the key again to select the
t
t
t
key, use the key again to select the
key when
(or )
(or )
key or
key when
7-1
(E)