Resetting The Detailed Settings (Lh71A General-Purpose Applications And Milling Machine Function); Start Of Operation - Sony LH71A Bedienungsanleitung

5. Settings
5-2-3. Resetting the Detailed Settings
Power ON
Current value display
Detailed
settings
Display
resolution
Display
switching
Axis label
switching
Scaling
Compensation
value
Flicker control
Sleep
Touch sensor
radius
or

Start of operation

* When the segmented error compensation value is set,
the unit switches to reference point acquisition mode.
5-6
(E)
(LH71A general-purpose applications and milling machine function)
1
Select axis
Use and
Performed for each axis.
2
Select axis
Use to select setting content
Performed for each axis.
3
Select axis
Use to select setting content
Performed for each axis.
4
Enter the setting value
5
Use to select the setting (compensation), and then set each option
Select axis
Enter the compensation value
Enter the
position
6
Use to select setting content
7
Use to select setting content
8
Enter the setting value
(When the display resolution is 0.001 mm)
* indicates the process when the setting does not
be changed.
to select setting content
Enter the
compensation value
is displayed,
1 Setting at
measuring unit
resolution or
higher/Diameter
display at
measuring unit
resolution
(except for
angle)/Polarity
2 IN-1/IN-2/IN-3/
IN -
3 X/Y/Z
4 0.100000 -
9.999999
5 OFF/LIN Err/
SEG Err
* See Part 5-5,
"Compensation".
6 OFF/1/2
7 OFF/1/5/10/30/
60
8 1.0000 - 20.0000
or
LH71A / LH72