Trouble shooting
Problem
Device doesn't
start
Bad cutting results
Possible Cause
Equipment is not charged
Switch lock (
3) has not
been operated properly
On/off switch (
defective
Safety key (
7) not inserted Insert safety key (see "Operation")
Too much friction due to lack
of lubrication
Dirty blade(
10/12)
Blade (
10/12) is blunt or
has nicks
Blade (
10/12) is dam-
aged
Error correction
Charge equipment (see „Charging
process")
Switch on (see „Operation")
8) may be
Repair by Service Centre
Lubricate blade (
(see „Cleaning/Maintenance")
Clean blade (see „Cleaning/Main-
tenance")
Sharpen blade (see „Cleaning/
Maintenance") or replace (see
„Spare parts/Accessories")
Replace blade (see „Spare parts/
Accessories")
GB
MT
10/12)
69