AL-KO EasyMow 1200 Betriebsanleitung Seite 41

Troubleshooting
Error message
CN099: Recov es-
cape
CN104: Battery
over heating
CN110: Blade mo-
tor over heating
CN119: R-Bumper
deflected
CN120: L-Bumper
deflected
CN128: Recov Im-
possible
CN129: Blocked
WL
CN130: Blocked
WR
456776_a
Possible cause
Robotic lawn mower does
not touch charging contacts.
Robotic lawn mower rectifi-
cation not possible.
Battery overheating - battery
temperature above 60 °C,
not discharging possible
Overheated mowing motor,
temperature > 80 °C
Robotic lawn mower has en-
countered an obstacle and
cannot move clear for safety
reasons, e.g. collisions close
to base station.
Obstacle encountered or
outside loop -> reversing not
possible, robotic lawn mo-
wer cannot free itself.
Left wheel motor blocked.
Right wheel motor blocked.
Solution
Put robotic lawn mower into base station and
check if charging contacts make contact
Have charging contacts checked and rene-
wed by a service partner
Rectify fault manually.
Emergency switch-off by monitoring electronic
control unit. Do not place robotic lawn mower on
base station. Switch off robotic lawn mower and
let battery cool down.
Switch off robotic lawn mower and let it cool
down. If this reoccurs, have robotic lawn mower
checked by a service partner.
Remove obstacle and acknowledge fault mes-
sage.
Remove obstacle, check cover deflection.
Remove blockage.
Remove blockage.
41