AL-KO EasyMow 1200 Betriebsanleitung Seite 34

en
In the week program, the days of the week and the
times are set when the robotic lawn mower should
mow automatically.
In menu item 1 [All days], the robotic lawn mo-
wer mows at the set times every day.
The symbol [X] shows the currently ac-
tive day of the week.
[All days] menu item
1. Select the [All days] menu item with the corresponding [arrow key] (3-3) and confirm with the [mul-
tifunction key right] (3-5).
2. Press the [down arrow key] (3-3) until [Change] is active.
3. Select the required menu item with the corresponding [arrow key] (3-3) and confirm with the [multi-
function key right] (3-5).
Explanation of symbols
(1) Menu item
(2) Menu item
(3) [-]
[R]
Edge mowing
[M]
(4) Start time
(5) End time
(6) [0 - 9]
Fixed entry point
[?]
Automatic entry point
Setting entry points
Main menu
Programs
Settings
Back Confirm
1. Use the [up arrow key] or the [down arrow key]
to select the [Programs] menu item until the
star symbol appears to the left of the menu
item.
2. Confirm with the [multifunction key right].
34
In menu item 2 [Day of week], the robotic lawn
mower mows at the set times on the set day
of the week.
1. Use the corresponding [arrow key] (3-3) to
select the required menu item and confirm
each one with the [multifunction key right].
Observe the mowing result and mow as
long as necessary in order to obtain a
well kept lawn.
All days
Day of week
Mowing window deactivated
The robotic lawn mower mows on the right along the
boundary cable. After mowing the edges, the robotic
lawn mower continues mowing the marked-out area.
Normal mowing
The robotic lawn mower departs from the base station
at the selected time for mowing.
The robotic lawn mower moves back to the base sta-
tion at the selected time.
The robotic lawn mower departs from the selected
entry point at the selected time for mowing.
The entry points are changed automatically (recom-
mended setting).
Calling up entry points
Programs
Week program
Entry points
Back Confirm
1. Use the [up arrow key] or the [down arrow key]
to select the [Entry points] menu item until the
star symbol appears to the left of the menu
item.
2. Confirm with the [multifunction key right].
3. Use the [up arrow key] or the [down arrow key]
to select the [Point X*] menu item until the star
symbol appears to the left of the menu item.
Startup
Entry points
Point X1 at
Point X2 at
Back Confirm
Robotic lawn mower