Husqvarna AUTOMOWER 105 Bedienungsanweisung Seite 104

selected. When the battery is fully charged, the
product will not leave the charging station and
begin mowing until the operation selection is
AUTO .
altered to
AUTO . The standard, automatic operation mode
•
where the product mows and charges
automatically.
MAN . When mowing secondary areas the MAN
•
setting must be used. If
product is started when it is out on the lawn, it
mows until the battery runs out. It then stops and
the 'Needs manual charging' message appears.
The product must then be moved manually to the
charging station and then started manually after
charging. If the product charges in the
it will fully charge, move about 20 cm / 8 in. out of
the charging station and then stop. This indicates
that it is charged and ready to start mowing.
34.3 Operating mode, START
®
Automower 305/310/315/315X/
420/430X/440/450X
Push the START button to select one of the following
operating modes:
Main area: The standard operating mode where
•
the product mows and charges automatically.
• Secondary area: When mowing secondary areas
this setting must be chosen.
In the Secondary area mode, the operator must move
the product manually between the main area and the
secondary area. The product mows until the battery is
empty. When the battery is charged, the product moves
out of the charging station and stops. The product is
now prepared to start operation, but needs confirmation
from the operator first.
Note:
If you want to cut the main area after the battery
is charged, set the product to
placing it in the charging station.
Override Schedule: Any Schedule settings made
•
can be temporarily overridden by selecting
Override schedule . It is possible to override the
Schedule for 24 h or 3 days.
Spot Cutting: (Not available for Automower
•
The product works in a spiral pattern to cut the
grass where it has been mown less than in other
parts of the lawn.
104 - Operation
MAN is selected and the
MAN mode,
Main area mode before
®
310).
Spot Cutting function is activated with the
The
START button. You can select how the product
should continue to work once mowing is finished
by pushing the right arrow button and then
Main Area or Secondary Area .
specifying
34.4 Operating mode, PARK
®
Automower 305/310/315/315X/
420/430X/440/450X
Push the PARK button to select one of the following
operating modes:
Park until further notice: The product stays in the
•
charging station until another operating mode is
selected by pushing the START button.
Start again in 3 hours: The product stays in the
•
charging station for three hours and then
automatically returns to normal operation. This
operation mode is suitable when there is a need to
pause operation, e.g. for temporary irrigation or for
games on the lawn.
Start with schedule: The product stays in the
•
charging station until the next schedule setting
permits operation. This operating mode is suitable
if one wishes to cancel an ongoing mowing cycle
and allow the product to stay in the charging
station until the next day. This option is not
displayed if there are no schedule settings.
34.5 Connectivity
You can communicate with your product through the
mobile application Automower
Connect is available for your mobile device and tablet
(Apple or Android). With Automower
activated, new icons will be displayed on the product's
display. For more detailed information, refer to complete
Operator's manual.
Note:
All countries do not support Automower
Connect because of legal reasons and regional
specified cellular systems. The included Automower
Connect lifetime service only applies if there is a third
part sub-supplier of 2G/3G/4G available in the
operational area. In some countries Bluetooth
available due to legal reasons.
® ®
Connect. Automower
®
Connect
®
®
®
is not
1418 - 008 - 22.12.2020