Symbols
Attention! This operation has to be carried out by specialized personnel!
Pay particolar attention to the follwoing indications!
Further information
Warnings
The purpose of this manual is to bring to the operator's knowledge with clarification texts and figures, the
requirements and the fundamental criteria for the installation and correct use of the instrument.
The equipment must be installed only by specialized personnel who must have read and understood
this manual. "Specialized personnel" means personnel who, because of training and professional
experience, have been expressly authorized by the plants' safety manager to carry out this installa-
tion.
Supply the instrument with voltage whose value falls within the limits specified in the characteristics.
It is the user's responsibility to ensure that the installation complies with the current norms.
For any anomaly found, contact the nearest Service Center. Any attempted dismantling or modifica-
tion not expressly authorized will void the warranty and release the manufacturer from any responsi-
bility .
Installation of the instrument
The following procedures must be carried out by specialized personnel.
All connections must be made with the instrument switched off.
Identification plate of the instrument
It is important to communicate this data in case of request for information or indications con-
cerning the instrument together with the program number and the version which are shown
on the cover of the manual and are displayed when the instrument is switched on.
Pagina –
page
–
Seite
10