Operation - Sharp FP-J40EU Bedienungsanleitung

OPERATION

START/STOP
START
CLEAN ION SHOWER
The main unit releases Plasmacluster ions with strong airflow and collects dusts while decreasing static electricity for
10 minutes. After that, the DUST sensor sensitivity is automatically increased and quickly detects impurities and clean
the air powerfully for 50 minutes.
FAN SPEED
AUTO SLEEP
OFF TIMER
Select the length of time you want, with the main unit on. The main unit automatically stops once the selected time is
reached.
(with the main unit ON)
STOP
NOTE
NOTE
MED MAX
2h 4h
2hour 4hour
• Select the desired fan speed.
• When the main unit starts operation, the operation
starts in the previous mode it was operated in.
(Except CLEAN ION SHOWER mode)
• The Plasmacluster Ion can not be turnes "OFF".
• When the operation finishes, the main unit will return to the prior
operation mode.
It is able to change the other mode and
AUTO
The fan speed is automatically controlled depending on the 3 detection.
(Dust / Odour / Light)
SLEEP
The main unit will operate very quietly, and the fan speed is automatically
switched depending on the amount of impurities in the air and room
brightness.
Cleanliness Monitor / Plasmacluster Ion Light automatically switches DIM
or OFF based on room brightness.
Room is bright: light is DIM
Even though the indicator is off, Plasmacluster Ion is dispersed into air
unless Plasmacluster Ion is turned off by
8h OFF
8hour CANCELLATION
EN-6
during this mode.
Room is dark: light is OFF
.