Herunterladen Inhalt Inhalt Diese Seite drucken

Bestway 58499 Gebrauchsanleitung Seite 15

Vorschau ausblenden Andere Handbücher für 58499:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Now the sand filter is ready for use. Set the Control Valve
to the Filter function.
NOTE: To prevent the risk of electrical shock dry any excess
water from yourself and the sand filter.
IMPORTANT: Before operation, make sure the tank is placed
steadily on its base and connected correctly to the pump.
2. Switch on the sand filter to run it.
NOTE: The sand filter has now started its
filtering cycle. Check that water is returning
to the pool and take note of the filter
pressure on Pressure Gauge. Generally,
the recommended sand filter pressure is
less than 0.56 Bar (8.0 PSI) when it is
running.
SAND FILTER MAINTENANCE
CAUTION: You must ensure the sand
filter is switched off and unplugged
before any maintenance begins or
severe risk of injury or death exists. As
dirt builds up in the sand filter, the
pressure reading on Pressure Gauge will
increase. When the Pressure Gauge is
0.56 Bar (8.0 PSI) or higher, or water flow to the pool is too
low, it is time to clean the sand. To clean the sand bed, follow
all instructions outlined previously in: Backwash and
Rinsing.
NOTE:
1. The Pressure Gauge is just used for measuring the water
pressure, not used for precision measurement.
2. We recommend you clean the sand bed once a month or
less regularly depending on how often the pool is used. Do
not clean the sand too frequently.
15
10
15
5
20
23
0
psi
bar

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis