Operating This Unit; Display Indication; Setup Menu - Pioneer DEH-1500UB Bedienungsanleitung

Operating this unit

Head unit
1 2 3 4 5 6 7
8 9 a b c d e
Part Part
1 8
h (eject) (equalizer)
2 9
SRC/OFF BAND
(back)/
MULTI-CONTROL
3 a DIMMER
(M.C.)
(dimmer)
4 (list) b
c/d
5 DISP c 1/ to 6/
AUX input jack
6 d
Disc loading slot (3.5 mm stereo
jack)
7 e
USB port Detach button
CAUTION
! Use an optional Pioneer USB cable (CD-
U50E) to connect the USB storage device as
any device connected directly to the unit will
protrude out from the unit, which could be
dangerous.
! Do not use unauthorized products.

Display indication

4 6 8
1 2 3 5 7
9 a
Indicator State
The list function is being oper-
1
(list)
ated.
Sub infor-
2
mation sec- Sub information is displayed.
tion
TA (traffic
3
announce- TA function is on.
ments)
TP (traffic
program
4 A TP station is tuned in.
identifica-
tion)
The sound retriever function
5
(sound re-
is on.
triever)
6
LOC Local seek tuning is on.
7
(repeat) Track or folder repeat is on.
(ran-
8
Random play is on.
dom)
Operating this unit
Indicator State
! Tuner: band and fre-
quency
! RDS: program service
name, PTY information
Main infor-
and other literal informa-
9 mation sec-
tion
tion
! CD player and USB stor-
age device: elapsed play-
back time and text
information
Appears when a lower tier of
a
folder or menu exists.
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
LANGUAGE (multi-language)
This unit can display the text information from a
compressed audio file even for information em-
bedded in English or Russian.
! If the embedded language and the selected
language setting are not the same, text infor-
mation may not display properly.
! Some characters may not be displayed prop-
erly.
1 Turn M.C. to select the desired setting.
ENG (English)—РУС (Russian)
2 Press M.C. to confirm the selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
Normally, the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on, the tuning
step automatically changes to 100 kHz. It may be
preferable to set the tuning step to 50 kHz when
AF is on.
! The tuning step remains at 50 kHz during man-
ual tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm the selection.
QUIT appears.
5 To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO. Press to select.
6 Press M.C. to select.
Section
02
3
En