Herunterladen Inhalt Inhalt Diese Seite drucken

Original Accessories/Auxiliary Equipment; Information On Saw Blades; Before Use; Charging The Battery Pack (See Fig . A) - Parkside PSSA 20-Li A1 Originalbetriebsanleitung

Akku-säbelsäge
Vorschau ausblenden Andere Handbücher für PSSA 20-Li A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Original accessories/auxiliary
equipment
Use only the accessories and additional
equipment that are specified in the oper-
ating instructions and are compatible with
the appliance. Using attachments or accessory
tools other than those recommended in the
operating instructions can lead to a risk of injury .

Information on saw blades

You can use any saw blade provided it is fitted with
a suitable mount – ½" (12 .7 mm) universal shaft .
Saw blades optimised for your sabre saw are avail-
able from retail stores in different lengths for
various purposes .
NOTE
TPI = teeth per inch = the number of teeth
per 2 .54 cm
Wood saw blade
Dimensions: 152 .5 x 0 .9 mm, 6 - 12 TPI
Ideal for: sawing construction wood, chipboard,
panels and plywood, and also plunge cuts .
PSSA 20-Li A1

Before use

Charging the battery pack
(see fig . A)
CAUTION!
Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger .
NOTE
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The storage climate
should be cool and dry and the ambient
temperature should be between 0°C and
50°C .
Connect the battery pack
battery charger
Insert the power plug into the socket .
The control LED
The green LED
indicates that the charging
process is complete and the battery pack
ready .
ATTENTION!
If the red control LED
that the battery pack
cannot be charged .
If the red and green control LEDs
flash, this means that the battery pack
defective .
Push the battery pack
Switch off the charger
between successive charging sessions .
Also disconnect the power plug from the mains
power socket .
to the high-speed
(see fig . A) .
lights up red .
flashes, this means
has overheated and
both
into the appliance .
for at least 15 minutes
GB │ IE │ NI
is
is
 7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis