Handling The Appliance; Maintenance And Cleaning; Disposal - Parkside PDFS 1300 A1 Originalbetriebsanleitung

Handling the appliance

1. Switch on the appliance – as described in
"Switching on and off" – and then place it
with the front edge of the base plate
the material.
2. Align the machine using the rip fence
by using a marked line.
3. Hold the machine by the handle and housing
with both hands. Guide it using moderate
pressure.

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■ Store the appliance in a dry and dust-free lo-
cation.
■ Cutting discs must be kept dry and must not be
stacked.
■ The appliance must always be clean and free of
oil or grease.
■ Use a soft, dry cloth to clean the housing.
■ The carbon brushes should only be replaced
by the service centre or an authorised specialist
workshop.
■ Ventilation openings must never be obstructed.
■ Remove any adhering swarf with a brush.
WARNING!
■ If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards.
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
PDFS 1300 A1

Disposal

The packaging consists of environmentally
friendly material. It can be disposed of in
on
the local recycling containers.
or
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
GB │ IE │
25 ■