Service Information - EINHELL TC-MG 135 E Originalbetriebsanleitung

Service information

We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category
Wear parts*
Consumables*
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_MG_135_E_SPK9.indb 23 Anl_TC_MG_135_E_SPK9.indb 23
GB
Example
Carbon brushes, clamping spindles, arbors, slee-
ves, fl exible shafts,
grinding wheels, grinding/sanding belts, cutters
(routers), felt polishers, drill bits, grinding pins,
cutting-off wheels, grinding heads, wire brushes
- 23 -
07.11.2019 09:22:52 07.11.2019 09:22:52