Illumination Scenes - Eurolite Edx-4Rt Dmx Rdm Bedienungsanleitung

Selecting a chase mode
1
Press UP or DOWN so many times until "ChMd" is indicated in the display. Press ENTER repeatedly to
confirm.
2
Use UP or DOWN to select sound control or automatic mode. Press ENTER to confirm and save your
settings.
3
Press ESC to return to the main menu level.
Running a chase
1
Press UP or DOWN so many times until "ruCh" is indicated in the display. Press ENTER to confirm.
2
Use UP or DOWN to select the desired chase (Ch 1 to 10). Press ENTER to confirm. The next menu
level is displayed.
3
If sound-controlled mode is selected, you can use UP or DOWN to adjust the microphone sensitivity. If
automatic mode is selected, you can use UP or DOWN to adjust the program running speed. Press
ENTER to confirm and save your settings.
4
Press ESC to return to the main menu level.

Illumination Scenes

There are 10 memory locations for illumination scenes available.
Programming a scene
1
Press UP or DOWN so many times until "PrSC" is indicated in the display. Press ENTER to confirm.
2
Use UP or DOWN to select the desired memory location (SC 1 to 10). Press ENTER to confirm.
3
Use UP or DOWN to select the desired channel (ChL 1 to 4). Press ENTER to confirm.
4
Use UP or DOWN to adjust the channel's dimmer value (0 to 255). Press ENTER to confirm and save
your settings.
5
Press ESC and repeat the steps 2 to 4 to program further scenes.
6
Press ESC to return to the main menu level.
Running a scene
1
Press UP or DOWN so many times until "ruSh" is indicated in the display. Press ENTER repeatedly to
confirm.
2
Use UP or DOWN to select a scene (SC 1 to 10). Press ENTER to confirm.
3
Press ESC to return to the main menu level.
10
23/28 00094312.DOCX, Version 1.0